How To Relight A Pilot Light On A Furnace. Using a long lighter, bring the flame close to the pilot opening. Wait about 15 minutes for any gas that is leaking in your furnace to burn away, and then turn.
The pilot should stay lit at this point. Turn the knob to “pilot” and hold down the “reset” button. Since the pilot light needs to remain active, your furnace is always consuming some gas.
Table of Contents
Make Sure The Thermostat Is Set To The Heat Mode.
This should ignite the pilot light. Turn the valve to off and wait three minutes. This is usually red and should have settings for “off,” “on,” and “pilot.”.
Once The Pilot Light Is Relit And You’ve Released The Reset Button, Your Furnace Should Fire Up Automatically.
Turn the knob to “pilot” and hold down the “reset” button. Locate the pilot light the gas control valve and the control knob aren't in the exact same place on every model, but they are usually easily accessible, although you often have to remove an access panel to find them. A few pro tips to keep in mind:
Since The Pilot Light Needs To Remain Active, Your Furnace Is Always Consuming Some Gas.
Turn the gas valve to the “off” setting. Using a long lighter, bring the flame close to the pilot opening. No tools should be required to do this.
Find The Pilot Light Assembly.
Similarly, it is asked, how do you relight a pilot light? Turn the knob from “off” to “pilot” relight the pilot; After waiting five or 10 minutes for the gas to clear out, turn the gas valve to “pilot.”.
If Instructions Are Not Present This Is The General Procedure That You Can Follow:
Light a lighter or match, then push in the reset button. This video is part of the heating and cooling series of training videos made to accompany my web. Turn the knob to “pilot,” and let gas to flow to the pilot.